Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Testing the trailer lights: Insert the trailer tester with the socket side facing down into the connection cable of your trailer. Press the yellow
switch on the right side of the trailer tester. If all control lamps light up, the lighting system of your trailer is OK. If one control lamp does not light
up, this may have one of the following causes: Defective bulb, broken cable, cable not connected in plug, or cable not connected in light.
Table for plug occupation
Connector
Lamp
1
Left indicator
2
Fog lights
3
Mass
4
Right indicator
5
Right rear light
6
Brake light
7
Left rear light
6. Care and maintenance
Clean the trailer tester with a soft, dry cloth only. Do not use aggressive cleaning agents or solvents.
Remove the battery from the trailer tester if you will not be using it for a long time. After a longer period without use, treat the plug contacts with
a little contact spray.
7. Notes for environmental protection
When this product reaches the end of its useful life, it may not be disposed o in the ordinary household waste, instead it must be
submitted to a collection point for the recycling of electrical and electronic devices.
Batteries should not be disposed of in the ordinary household waste! Use batteries are to be disposed of at public collection points
in your areas or wherever batteries are sold.
The materials can be recycled. By recycling, reuse of materials or other forms of reuse of old devices, you make an important contribution to the
protection of our environment!
8. Contact information
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
4
Cable colour according to ISO 1724
Yellow
Blue
White
Green
Brown
Red
Black
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
Clamp designation according to DIN 72552
L
54g or NS
31
R
58R
54
58L
info@eal-vertrieb.com
www.eal-vertrieb.com
Advertenties
Inhoudsopgave
