Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EU Declaration of Conformity
TMJL 100
We, SKF MPT, Meidoornkade 14, 3992 AE Houten,
The Netherlands herewith declare under our sole
responsibility that the products described in these
instructions for use, are in accordance with the
conditions of the following Directive(s):
MACHINERY DIRECTIVE 2006/42/EC
and are in conformity with the following standards:
EN–ISO 12100:2010, EN–ISO 4413
Houten, The Netherlands, March 2024
Guillaume Dubois
Manager Quality and Compliance
1. Description
The TMJL 100 has a maximum pressure of
100 MPa (14 500 psi) and delivers a volume per
stroke of 1 cm
(0.06 in
3
for use on HMV nuts, bolt tensioners, hydraulic
pullers etc, but is also suitable for other oil injection
applications where a maximum pressure of
100 MPa (14 500 psi) is required. The pump is
supplied with a 3 metre long, high pressure hose
2. Technical data
Maximum pressure
Volume per stroke
Oil container capacity
Handle force at 100 MPa
Pressure hose
Connection nipple
Oil viscosity of mounting fluid
Weight (filled with oil)
Designation
4
EN
). It is mainly intended
3
100 MPa (14 500 psi)
1 cm
3
(0.06 in
800 cm
3
320 N (70 lbf)
3 m (10 ft) long with quick connection coupling
G
1
/
, external or internal thread
4
300 mm
13 kg (29 lb)
TMJL 100
UK Declaration of Conformity
TMJL 100
We, SKF MPT, Meidoornkade 14, 3992 AE Houten,
The Netherlands herewith declare under our sole
responsibility that the products described in these
instructions for use, are in accordance with the
conditions of the following Directive(s):
Supply of Machinery (Safety) Regulations 2008
(2008 No. 1597)
and are in conformity with the following standards:
EN–ISO 12100:2010, EN–ISO 4413
The person authorised to compile the technical
documentation on behalf of the manufacturer is
SKF (U.K.) Limited, 2 Canada Close, Banbury,
Oxfordshire, OX16 2RT, GBR.
Houten, The Netherlands, March 2024
Guillaume Dubois
Manager Quality and Compliance
with quick connection coupling. Mating quick
connection nipple for attachment to the workpiece is
included. The pump is filled with SKF mounting fluid
LHMF 300 and comes with an additional 1 litre can
with the same fluid.
Everything is packed in a sturdy case. The pump has
an over-pressure valve and a pressure gauge. The
release valve is an integrated part of the pump head.
3
)
(49 in
)
3
2
/s (1 400 SUS) at 20 °C
Advertenties
Hoofdstukken
Inhoudsopgave
