13. Do not use the device with a damaged power cord or if it has been dropped or
damaged in any other way or malfunctions. Do not repair the device yourself, as there
is a risk of electrocution. Return a damaged device to a competent service center for
inspection or repair. Any repairs may be made only by authorized service centers.
Improper repair may cause serious danger
14. Place the appliance on a cool stable, level surface, away from hot kitchen
appliances such as an electric stove, gas burner, etc....
15. Do not use the device near flammable materials.
16. The power cord must not hang over the edge of the table or touch hot surfaces.
17. Do not leave the device plugged into an outlet unattended.
18. Do not use the egg cooker if it is not filled with water.
19. The product is intended only for cooking eggs.
20.
21. To provide additional protection, it is advisable to install in the electrical circuit, a
residual current device (RCD) with a rated residual current of not more than 30 mA. In
this regard, consult a specialist electrician.
22. Always take special care when boiling water in the kettle. Do not
23. Allow the appliance to cool for 30 minutes before using it again.
24. Only carry the kettle by holding the handle.
25.The appliance is not designed for use with external timers or a separate remote
control system.
26. Do not move or move the device if it is filled with hot water or
steam.
27. After turning off the device, unplug the power cord from the outlet and let the
equipment cool down before cleaning or storing it. Allow a sufficiently long period of
time, as a heated appliance cools down slowly.
DEVICE DESCRIPTION (Fig. A)
1. Steam opening
4. Graduated measuring cup 5. Egg pricker
6. On/off switch with LED
10. Handle
USE OF THE APPLIANCE
Up to 8 eggs can be cooked simultaneously. Depending on the setting, eggs can be cooked hard (hard), medium (medium) and
soft (soft).
1. Pour water into the tray (9) 160ml.
2.Prick the rounded end of the egg with an egg pricker (5) and place it on the tray (3) with the pricker facing up.
WARNING: Use the pricker carefully. It is very sharp !
3. Place the egg tray (3) on the body (7) and put on the lid (2). Plug the plug(8) into a suitable power outlet.
4. Turn on the device by setting the switch to the position of the desired hardness of egg preparation (6). The indicator will light up.
2. Lid
3. Egg tray (up to 8 eggs)
8. Power cord
7. Body
9. Water tray
11.Mould for fried eggs
4