Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Transmitter
1 HDBase T Out socket
2 RS232 socket
3 LAN socket
4 LAN socket
5 HDMI In socket
6 Power connector Power 48V
Receiver
13 HDBase T In socket
14 RS232 socket
15 LAN socket
16 LAN socket
17 HDMI Out socket
18 Power connector Power 48V
Setup
a) HDMI connection
Example of a connection diagram
Transmitter
HDMI In
• Turn off all devices and disconnect them from the power supply before connecting each
component.
• It is supplied with rubber feet. If necessary, you can attach these to the bottom of the
transmitter and receiver. Note that rubber feet can leave marks on sensitive surfaces. If
necessary, place a suitable base on the surface.
• Connect your HDMI device (e.g. Blu-Ray player, TV box) and the HDMI In (5) on the
transmitter with a suitable HDMI cable.
• Connect the HDBase T Out (1) socket of the transmitter to the HDBase T In (13) socket of
the receiver with a CAT6a network cable. Observe the technical data section for the length
and type of the network cable.
• The RS232 (2, 14) socket allows you to connect a PC or notebook
that issues commands via RS232 (for example, turning on / off from a
compatible projector or monitor). It is supplied with 2 RS232 Phoenix
plugs. Observe the illustration opposite with the correct connections.
• Connect an HDTV / Monitor and the HDMI Out (17) socket to the receiver with a suitable
HDMI cable.
• Connect the tab of the power adapter to the power connector Power 48V (6) and the mains
plug with a suitable mains socket. Power is supplied to the receiver via the network cable.
b) Brief description of the controls
Control
Function
LAN socket
Connect Ethernet devices such as a router or computer. It also
serves as an Ethernet switch. The signals work bidirectionally.
HDMI In socket
Connect HDMI device.
HDMI Out socket
Connect HD TV/Monitor.
Power connector
Connection for the power adapter.
Power 48V
Interruptors of
Switch for RS232 mode and Internet update of the internal
RS232 MODE and
manufacturer software.
CTRL / UPDATE
LED Power
It indicates that the product is receiving power.
LED Link
It indicates that the product detected an HDBaseT connection
(input and output).
LED Status
It indicates that the product is connected to an HDMI device.
IR In socket
Connection for the IR receiver.
IR Out socket
Connection for the IR transmitter (send).
All manuals and user guides at all-guides.com
7 Interruptors of RS232 MODE and
CTRL / UPDATE
8 LED Power
9 LED Link
10 LED Status
11 IR In socket
12 IR Out socket
19 Interruptors of RS232 MODE and
CTRL / UPDATE
20 LED Power
21 LED Link
22 LED Status
23 IR In socket
24 IR Out socket
Receiver
CAT6a
RS232
Care and cleaning
• Disconnect the product from the mains before each cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the case or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfil your statutory obligations and contribute to environmental protection.
Technical data
a) Transmitter (TX) / Receiver (RX)
Output voltage/current ...............48 V/DC 0.5 A
Bandwidth ..................................up to 18 Gbps
HDMI port ..................................Transmitter HDMI input, receiver HDMI output
Video resolution .........................1080p (network cable CAT6a with max. length of 100 m)
Compatibility ..............................HDCP 2.2, HDR
PoE output .................................Bidirectional
RS232 ........................................Bidirectional
IR-transmitter/receiver ...............Bidirectional
HDMI Out
Ethernet Interface ......................100 Mbps
Operating temperature ..............0 to +55 ºC
HD TV
Storage temperature ..................-10˚C to +70˚C
Operating/storage humidity .......5 - 90% relative humidity
Dimensions (L x W x H) .............143 x 98 x 13 mm (per unit)
Weight .......................................approx. 575 g
b) Power adapter
Input voltage/current ..................100 - 240 V/AC 0.5 A
Output voltage / current .............48 V/DC 0.5 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
4K 60 Hz 4:4:4 (network cable CAT6a with max. length of 70 m)
TX on RX: max. 14.4 W / RX on TX: max. 10.6 W
*1911200_v1_0819_02_hk_m_en
Advertenties
Inhoudsopgave
