Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Weekday
• To change the language in which the weekday
is displayed (5), press the button (12) for 3
seconds. The current language will be displayed.
• Hold down the button (12) to change to the
other languages.
Note - Day of the week
You can choose German (GE), English (EN),
Italian (IT), Spanish (SP) or French (FR) for the
weekday display.
Setting the time zone
Note - Time zone
• The DCF signal can be received over long
distances, but always transmits the current
Central European Time in Germany. Make sure
you account for the time difference in countries
with another time zone.
• If you are in Moscow, the time is 3 hours
later than in Germany. This means that you
should set +3 for the time zone. The clock
then automatically sets the time to 3 hours
after the DCF signal received or relative to the
manually set time.
• Press and hold the button (13) for approx.
3 seconds until the time zone symbol
displayed.
• Press and hold the MODE button (11) for approx.
3 seconds to set the required time zone difference.
• To select the individual values, press the button
(13) or the button (12) and con rm each
selection by pressing the MODE button (11).
• Press and hold the button (13) for 3 seconds
to switch the display between local and time
zone-shifted time.
Selecting 12 or 24-hour format
• Press the button (13) to switch between the 12
and 24-hour formats.
5.3. Temperature display
• Press the °C/°F/WAVE button (10) to choose
between °C and °F for the temperature display (8).
5.4. Alarm
Note - Alarm
The alarm time always depends on the time
displayed, that is, the local or time zone-shifted
time (
Setting the alarm time
• Repeatedly press the MODE button (11) to access
alarm mode 1 (ALM1) or 2 (ALM2).
• Press and hold the MODE button (11) to set the
alarm time (8) for the alarm displayed. The hours
display begins to ash.
• Press the button (13) or the button (12) to
select the hour for the alarm time and con rm your
selection by pressing the MODE button (11). The
minutes display begins to ash.
• Repeat the process to set the minutes for the
alarm time.
• Press the MODE button (11) repeatedly to also set
the other alarm mode or return to the temperature
display.
Activating/deactivating the alarm
is
F
• Press the ALARM button (9) repeatedly to
activate/deactivate alarm 1 or alarm 2.
• If an alarm is activated, the corresponding symbol
1
).
F
/
will be displayed.
2
5
Advertenties
Inhoudsopgave
