Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
DIAMOND3
MAINS CONNECTION
Make sure you connect the mixer to
a power supply that corresponds with the
mixer (see sticker on the machine).
• Do not use damage cables.
• All cables should have a diameter of
at least 3 x 1,5 mm² for a total cable
length of 25m
Main Fuse: 10 A
SWITCHING ON
Do not use a machine that cannot be
switched ON or OFF. Damaged switches
should be repaired or replaced by an
authorized service center.
Switching ON
Press the ON/OFF switch (3). the mixer
will start to rotate. Increased pressure on
the switch will increase the rotating speed
of the whisk.
Switching OFF
Release the ON/OFF switch (3).
2-SPEED GEARING
The mixer is equipped with a 2-speed
gearing:
1st gear: 0 min
to 380 min
–1
2nd gear: 0 min
to 660 min
–1
Only change gears when the mixer is
turned OFF and the whisk has come to a
complete stop.
Changing gears
Turn the gear swith (5) to the speed of your
choice.
1st gear: 0 min
to 380 min
–1
2nd gear: 0 min
to 660 min
–1
MX11
®
WORKING WITH THE MIXER
• Use whisks recommended by the
• The whisk that is supplied with the
• Increase the speed during the mixing
• Hold the mixer with both hands during
• Do not reach into the rotating whisk.
MAINTENANCE
!
work:
• Use original spare parts only. The use
• More complicated repairs should be
–1
–1
• Store unused machines in a locked dry
!
low the maintenance instructions:
• Ventilation slots should be kept open
• Remove dust and dirt using a cloth or
–1
• Do not clean the machine with running
–1
17
manufacturer only.
Maximum diameter: Ø 160mm
mixer is suited for the following materi-
als: building compounds such as adhe-
sives, paste, glue, knifing filler, plaster,
tile cement etc.
process. Immerse the whisk through
the material until it is thoroughly mixed.
Follow the processing instructions from
the supplier.
mixing.
Prior to any maintenance or cleaning
–
Turn the mixer OFF.
–
Wait for the whisk to come
to a complete stop.
–
Pull the power plug.
of other parts may lead to damage or
injury.
done by the manufacturer or an author-
ized service center.
place and out of reach of children.
For continued smooth operation fol-
and clean.
a soft brush.
water or highpressure cleaners.
GB
Advertenties
Hoofdstukken
Inhoudsopgave
