Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating instructions
Solar Garden Light, Set of 5
Item no. 1518443
Intended use
The product is suitable for illumination of backyards. A white LED serves as the illuminant. The
light turns on automatically at nightfall. Power is supplied via rechargeable battery, which gets
charged via solar panel during daytime.
The product is splash proof and suitable for outdoor use (IP44).
The product is intended for use as a decoration and is not suitable for domestic lighting.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire etc. Read the
instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• 5x solar garden light with Ni-MH rechargeable battery
• 5x ground spikes
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or
scan the printed QR code. Follow the instructions on the website.
Description of symbols
The symbol with an exclamation mark in a triangle indicates important instructions
contained in these operating instructions that must be followed.
The arrow symbol alerts the user to the presence of important tips and notes on
using the device.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, strong jolts, flammable gases,
vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
• Do not short circuit the battery terminals.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
All manuals and user guides at all-guides.com
Operating elements
Installation
• Insert the lamp head into the standpipe.
• Insert the blunt end of the ground spike all the way into the other end of the standpipe.
Setup location
• Insert the ground spike into a level and sufficiently firm surface (e.g. lawn or plot). A stony
• The solar panel on the top of the light head should be exposed to as much direct sunlight as
• Do not install the product in the direct proximity to other light sources such as yard or street
• The product is suitable for use in unprotected outdoor areas. It must however not be used
Operation
• Turn the solar panel unit counter clockwise to remove it.
• Pull out the protective strip from the bottom of the solar panel unit.
• Replace the solar panel unit on the lampshade. Turn the solar panel unit clockwise to lock
• When the rechargeable battery is inserted and fully charged, the LED light turns on
• With increasing brightness the LED light will turn off.
b) Rechargeable battery
• Correct polarity must be observed while inserting the rechargeable battery.
• The rechargeable battery should be removed from the device if it is not used for
a long period of time to avoid damage through leaking. In case of skin contact,
leaking or damaged rechargeable batteries can cause acid burns. Use protective
hand wear when handling damaged rechargeable batteries.
• Rechargeable batteries must be kept out of reach of children. Do not leave
rechargeable batteries lying around, as there is risk, that children or pets swallow
them.
• Rechargeable batteries must not be dismantled, short-circuited or thrown into fire.
Never recharge non-rechargeable batteries. There is a risk of explosion!
1
2
1 Solar panel
2 Lampshade
3
3 Standpipe
4 Ground spike
4
Remove the protective strip from the bottom of the solar panel unit just before first
use.
subsurface will cause damage to the ground spike. Make sure the ground spike is inserted
securely and cannot tip over.
possible to optimally charge the rechargeable battery. Do not set up the solar panel in the
shade or under any cover.
lights, otherwise the product will not switch on automatically at nightfall.
in or under water.
it in place.
The battery must be fully charged for 3 days before first time operation.
Remove the rechargeable battery just before sundown to prevent the light from
turning on at dark.
Replace the rechargeable battery the following day after sunrise to continue
charging.
automatically at dark.
If required, carry out a performance test in a dark room.
Advertenties
Inhoudsopgave
