Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
Shut off the power source and disconnect the spark plug lead (electric unit disconnect
from supply) whenever you leave the work area
Do not tilt the machine while the power source is running
NL
6.3
Maintenance and storage
When the machine is stopped for servicing, inspection, or storage, or to change an
accessory, shut off the power source, disconnect the spark plug wire from the spark plug
(electric unit disconnect from supply), make sure that all moving parts have come to a
DE
complete stop and, where a key is fitted remove. Allow the machine to cool before making
any inspections, adjustments, etc
Store the machine where fuel vapor will not reach an open flame or spark. For extended
FR
storage periods, run the unit dry of fuel. Allow the machine to cool before storing.
When servicing the cutting means be aware that, even though the power source will not
start due to the interlock feature of the guard, the cutting means can still be moved by a
manual starting mechanism.
6.4
Additional safety instructions for units with bagging attachments
Shut-off the power unit before attaching or removing the bag.
7 ASSEMBLY INSTRUCTIONS
Open the package and remove the machine from package;
Pull out the collect box and take out the main part of the machine and all accessories;
7.1
Assembly of the shredder
Fig. 1:
Turn the shredder upside down.
Pivot the legs upward, place the supplied wheel axle through the respective openings.
Insert the screws through the black plastic and screw tight.
Fig. 2:
Place the supplied sleeves on the wheel axles. Then the wheels, the pinion and, finally,
the lock nut with the wheel cover.
7.2
Collect box (Fig. 3)
Push the collect box into the undercarriage after pushing the lock button (6) upward.
8 OPERATION
8.1
On/off switch (Fig. 4)
Press the on/off switch to start and/or stop the machine.
Note: the machine is equipped with a safety switch to prevent it from being switched on again
accidentally after a power failure.
8.2
Overload protection (Fig. 4)
Overload (e.g. blocking up of the cutting blades) leads to a standstill of the machine after a few
seconds. To protect the motor from being damaged, the overload switch (10) will cut the mains
automatically. Wait at least 1 minute before restarting by first pressing the reset button and
then the on/off switch.
All manuals and user guides at all-guides.com
Warning! You may need assistance when lifting the machine out of the box
and assembling.
Warning! Take care when tilting the unit onto its wheels as the unit has an
uneven weight distribution when tilted and during wheeled transportation.
www.chestergarden.be
10
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
