Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
15 Troubleshooting
FAULT
POSSIBLE CAUSES
Mobile air
Mains plug is not plugged into
conditioner does
the plug socket.
not start.
The "W.F" display lights up
(water tank full).
The room temperature is
lower than the set
temperature.
The mobile air
Doors and/or windows are not
conditioner is not
properly closed.
operating with
the expected
effectiveness.
There are additional heat
Insufficient
sources in the room.
cooling.
The temperature is set too
high.
Air inlet or outlet is blocked.
Air filter or air outlet is
Air is not blown
blocked.
out.
Operating noises. The mobile air conditioner is
not standing on a level and
stable surface.
Air filter or air outlet blocked.
Appliance makes "flowing"
noises.
Page | 28
All manuals and user guides at all-guides.com
MEASURES
Check whether the mains plug has
been plugged in correctly.
Empty the water tank.
Lower the set temperature.
Close all doors and windows, etc.
through which warm air may enter.
Remove the heat sources, if
possible.
Lower the set temperature.
Remove objects from the air
inlet/outlet.
Clean the air filter and air outlet.
Observe the minimum clearances.
See above.
Ensure that the mobile air
conditioner is standing on a level
and stable surface.
See above.
Flowing noise of the refrigerant. No
measures necessary.
Advertenties
Inhoudsopgave
