Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Switching ON/OFF the freezer
Switching ON the freezer: press and hold
the pushbutton (1). The operation of
switching on the freezer is signalled by
the green light-emitting LED (3), and the
real temperature inside the freezer's
chamber shall be shown on the display.
Switching OFF the freezer: press and
hold the pushbutton (2).
Temperature regulation
The temperature in the freezer's chamber
can be set within the range from -23
o
up to -16
C. When pressing and holding
the FREEZE pushbutton (4), the set
temperature shall be shown on the
display. When pressing the pushbutton
s s s s s
(7)
or pushbutton
possible to modify setting of the
temperature inside the freezer.
Every pressing of the pushbutton shall
activate a brief acoustic signal. In case of
the
power
supply
disconnecting the power supply to the
freezer, the control will keep in the
memory the latest settings after the power
supply has been restored.
Temperature inside the freezer
The set and displayed temperatures
are the freezer's average temperatures.
It should be remembered that the fol-
lowing, among others, impact the tem-
perature of the freezer chamber: the
temperature of the environment, the
level to which the chamber is filled with
food products, frequency of the door
being opened, the level of frost on
cooling elements inside. In an event of
a significant change in any of the
above listed factors, the temperature of
the freezer should be set appropriately,
e.g., if the temperature of the environ-
ment is low, lower the freezer tempera-
All manuals and user guides at all-guides.com
ture and wait 24 hours.
Quick freezing
Quick freezing at a low temperature is
important to maintain the quality of the
food products. Quick freezing is activated
by pressing and holding the function
button (9) and pressing the FREEZE
pushbutton (4). The blue light-emitting
LED (10) switches on signalling
activation of the quick freezing function.
You can chose between freezing in 24 or
48 hours:
o
C
-
t t t t t
(8) it is
-
failure
or
-
The quick freeze function will be
automatically disabled after 24 or 48 hours.
After pressing the quick freezing function
pushbutton, the indication "24" or "48" is
displayed for 5 seconds. Afterwards the
real temperature inside the freezer's
chambers will be shown on the display.
It is recommended to switch on the quick
freezing function (24 or 48 hours) for
approximately 2 hours before loading the
freezer's chamber with large quantities
of the food products.
Brief temperature variations
Brief temperature variations are normal
and may occur when for example the fresh
food products are stored in the freezer or
when the door is open for a longer time.
8
by holding the function button (9) and
pressing once the
pushbutton (4) you switche on the
24-hours quick freezing function
and "24" is shown on the display,
by holding the function pushbutton
(9) and pressing twice the FREEZE
pushbutton (4) you switch on the 48-
hours quick freezing function and
"48" is shown on the display,
the next pressing of the pushbutton
(4) switches off the quick freezing
function and switches off the blue
light-emitting LED.
GB
FREEZE
Advertenties
Hoofdstukken
Inhoudsopgave
