Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
❐ The steam cleaner should be descaled with a standard commercial descaling agent rough-
ly every 6 months in order to extend the useful life of the steam cleaner. Also note the
manufacturer's instructions on the packaging of the descaling agent.
❐ Do not use corrosive or abrasive cleaning agents or cleaning pads for cleaning. These can
damage the surface.
•
Empty the water reservoir (see the "Putting Into Operation" chapter, "Adding/Removing
Water" section).
•
If necessary, wipe down the outside of the device with a soft, slightly damp cloth and dry
it with a soft cloth.
•
Clean the attachments if necessary with clear, warm water.
•
Allow all device and accessory parts to dry completely before you store them in a clean
and dry place that is inaccessible to children.
Troubleshooting
If the device is not working properly, please check fi rst of all whether you can rectify a problem
yourself. Otherwise you should contact the customer service department. Do not attempt to
repair a defective device yourself!
Problem
The device does not
work. /No steam is
produced.
Technical Data
Model:
Article number:
Voltage supply:
Power:
Water reservoir capacity:
Protection class:
04960_DE-GB-FR-NL_V0.indb 25
04960_DE-GB-FR-NL_V0.indb 25
Possible cause/solution
•
Is the mains plug correctly inserted into the socket?
•
Is the plug socket defective? Try a different socket and check the
fuse of your mains connection.
•
Make sure that the water reservoir has been fi lled.
•
The device has not yet reached its operating temperature. Wait
until the control lamp has gone out and then press the steam
release button.
•
The pipes of the device are not yet completely fi lled with steam.
Press the steam release button several times until steam emerg-
es.
HS101
Z 04960
230-240 V AC ~ 50 Hz
800 W
ca. 255 ml
I
25
19.11.2013 16:33:31
19.11.2013 16:33:31
Advertenties
Hoofdstukken
Inhoudsopgave
