Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2
Add ingredients to
the nutribullet
®
NOTE:
Do not overfill! To
avoid leakage, do not add
ingredients beyond the MAX
line.
WARNING: NEVER BLEND HOT OR
CARBONATED INGREDIENTS OR LIQUIDS IN
THE SEALED VESSEL,
as doing so may cause
excessive pressure buildup, resulting in risk of
personal injury and or property damage.
3
Twist the easy-twist
extractor blade onto the
cup until tightly sealed.
WARNING:
Handle the
easy-twist extractor blade
assembly with care, as
the blades are sharp.
Never leave the appliance
unattended while in use.
4
Plug the power cord into
an electrical outlet and
POWER
press
the blender.
5
Turn the cup upside down
and place it onto the motor
base, gently turning the
cup clockwise to lock into
the motor base.
NOTE:
The cup must be locked
onto the base for the unit to
operate.
6
To begin
blending, select a
manual speed or program
Blending Control
on the
Panel.
To pause
press the current speed
or program once, the unit
will stop running and the
timer will pause.
blending,
press a manual
speed or the same program.
10
CAUTION
Do not remove the easy-twist extractor
cup.
blade from the nutribullet
blending has completely ceased. Do not use
the easy-twist extractor blade as a storage
lid for your cup. Some foods may contain
active ingredients or release gases that will
expand if left in a sealed container, resulting
in excessive pressure buildup that can pose
a risk of injury. When storing contents in the
cup, use plastic wrap or foil to seal your
container. Always point contents away from
your body when unsealing.
NOTE:
Proceed to the blending
control panel chart on page 11
for speed definitions.
7
When you have reached your
desired consistency, stop
the appliance by pressing
POWER
enter idle-mode. The timer
will reset and the
Control Panel
illuminated. Press
again to turn off the unit
completely.
NOTE:
speeds will automatically
to turn on
shut off after 60 seconds.
8
Unlock the assembly by
gently twisting the cup
counterclockwise. You will
hear a click. Enjoy!
NOTE:
Blending should never
take longer than one minute
to yield smooth and creamy
results.
blending,
To resume
Blending control panel:
manual speeds.
cup until
®
TURNING ON/OFF
The power button controls the master power
of the appliance. If pitcher with pitcher lid or
nutribullet
cup is locked in place, pressing
®
POWER
will indicate the motor is powered on
and illuminate the
. The unit will
Blending
will remain
TIMER
POWER
When using a blending speed:
(00:00) and increases during operation, showing
time elapsed since blending began.
program presets:
operation until program is completed.
PULSE
Use to control chopping and processing.
WARNING: DO NOT
ingredients as ingredients may splash.
LOW SPEED
Use to mix thin batters, gravies and marinades.
Or, to scramble eggs, process cooked foods and
uncooked fruits.
WARNING!
NEVER BLEND HOT LIQUIDS OR OTHER HOT
INGREDIENTS IN ANY SEALED NUTRIBULLET
CUP.
buildup, resulting in risk of personal injury or
property damage. Hot items should only be
blended in the pitcher using proper safeguards.
TO SELECT A SPEED
Press the desired speed once to turn on. The
selected speed will illuminate and the rest of the
speeds will dim. To toggle to another blending
speed, press the inactive, dimmed speed desired.
To pause blending at any point, press the active
speed, the motor will stop and the timer will pause
counting. To resume blending, press a manual
Blending Control
Panel.
speed button again. To return to main blending
control panel, press
down after pausing, press
unplug the unit.
timer starts at zero
When using
MEDIUM SPEED
timer counts down during
Use to cream soups, blend sauces and spreads, or
mix dips. Also great for grinding nuts, making mixed
drinks, powdered drinks or milkshakes.
HIGH SPEED
Use to liquefy thick mixtures and extract frozen fruits
use this setting with hot
and vegetables into smoothies.
PULSE
Press and release the
ingredients. If you hold the
continue to run until you release it. Do not hold and
run the pulse continuously for more than one minute.
NOTE:
If the unit stops running and power and timer
display are flashing, your device may be overheated.
Unplug your device and wait 15 minutes. Plug back in to
reset.
®
Doing so may cause excessive pressure
POWER
once. To fully power
POWER
twice and
PULSE
button to chop
PULSE
button down, it will
11
Advertenties
Inhoudsopgave
