Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
• If the display shows the salt mes-
sage, fill the salt container.
• If the display shows the rinse aid
message, fill the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
7.1 Using the detergent
A
B
30
20
7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
• You have not closed the door.
• You have not pressed OK to start the
programme.
• The programme is completed.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
3. Close the appliance door.
4. Set the applicable options.
5. Set a programme.
• Press one of the navigation touch-
pads to go through the programme
menu and select a programme.
Press OK to confirm. The pro-
gramme starts.
• If you want to start the MyFavourite
programme, press MyFavourite .
The programme starts.
• If you use combi detergent tablets,
5. Set and start the correct programme
for the type of load and the degree of
soil.
1.
Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compartment
(A) .
3.
If the programme has a prewash
A
phase, put a small quantity of deter-
-
+
gent on the inner part of the appli-
ance door.
4.
If you use detergent tablets, put the
C
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
When a programme starts, the display
shows:
• Duration of the programme that de-
creases with steps of 1 minute.
• Symbol of the programme.
• In the lower part of the display a pro-
gramme bar is visible. While the pro-
gramme operates, the middle seg-
ments come on with fixed light, while
the 2 lateral segments flash. The num-
ber of segments with fixed light increa-
ses as the programme progresses.
Starting a programme with delay
start
1. Set the applicable options.
2. Set a programme.
3. Press Delay. The display shows:
• Start : Start time of the programme.
• End : End time of the programme.
4. Press the navigation touchpad on your
right to set the delay. You can delay
the start of the programme from 1 to
24 hours. As the number of hours in-
creases the time indicated in Start and
End is updated. To decrease the num-
ber of hours press the navigation
touchpad on your left.
5. Press OK to confirm and to start the
countdown of the delay start. When
ENGLISH
activate the Multitab option.
31
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
