Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
1. Open the battery compartment on the base of the mouse. Insert
two AAA batteries (1.5V) making sure the polarity is correct. Close
the battery compartment again.
2. Now plug the receiver into a USB port on your PC.
The device will be detected and installed automatically.
3. You can select the mouse sensor sensitivity using the dpi switch.
Four sensitivity levels are available. The mouse also glows in a
different colour to indicate the dpi setting: 600 dpi (green),
1,000 dpi (red), 1,600 dpi (turquoise) and 2,400 dpi (blue). To
deactivate mouse illumination, set the switch on the base to
'Off'. Please be aware that the multi-colour dpi indicator is also
deactivated when you do this.
4. The mouse will switch to power-saving mode if
not used for ten minutes. Press any mouse button
to reactivate the device.
5. For ease of transport, stow the receiver in the
compartment in the base.
Advertenties
Inhoudsopgave
