Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Washing
7
Close the washer door and
press the Start/Stop button
Time remaining
When the programme starts an estimated
programme time, in hours and minutes, is
displayed. The remaining time is updated three
times during the programme, based on the actual
load and the incoming water temperature. The
first update takes place after about 15 minutes.
The remaining time is last updated just before the
final rinse."
To add or remove washing after the
program starts
If you want to add or remove items after the
programme has started, you can stop the
programme by pressing and holding the Door
opening button (key symbol) for three seconds.
The programme time flashes on the display. When
you restart the machine, add any extra detergent
needed and close the washer door. The machine
continues automatically from the point where the
programme was interrupted.
Stopping or changing a programme
You can stop a programme by pressing the
Start/Stop button for three seconds. To restart the
machine, select a new programme, add any extra
detergent needed and press the Start/Stop button.
NOTE!
Do not open the detergent compartment while
the machine is running.
8
Once the program has finished
Once the programme has finished, "End"
appears in the display.
The washer door opens automatically once the
programme has finished. If you want to deactivate
the automatic door opening function, see the
"Selecting settings" section.
• Remove the load.
• Turn off the main power switch, this will save
energy.
If you have small children or pets at home, close
the washer door once you have removed the
laundry.
Backlighting
Two minutes after the wash programme finishes
the display backlighting enters energy saving
mode.
17
Advertenties
Hoofdstukken
Inhoudsopgave
