Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
•
The appliance should be plugged into a socket that is easily visible and accessible.
•
During the first few minutes after switching on, there may be a dark dot on the surface of the
heating elements. This is normal and does not affect the performance of the appliance.
•
These appliances must be earthed.
•
Before installing or replacing the lamp, always disconnect the appliance from the 220-240V
power supply.
Electric patio heater Claire is built with components of the highest quality in accordance with
applicable legal regulations and certified for safety in use. For the best results from the appliance,
ensure that installation is carried out by a qualified electrician in accordance with the following
instructions and in full compliance with current regulations. Carefully follow the instructions and
recommendations below when using the heater.
Connection to 220-240 volts
It is important that the electricity supply has sufficient capacity for the electrical load of the installed
device.
•
Installation:
Minimum distances required:
(a) 250 mm from the side wall
(b) 500 mm from the ceiling
•
In general, heaters should be placed at a safe distance (clearance) of at least 2.0 m from
combustible materials and glass walls. When installed in workshops or garages where flammable
or combustible paint is used, patio heaters should be installed at a distance of at least 4.0 m from
the source of danger.
•
If the patio heaters are installed in areas where paint is being sprayed, they must not be used
during spraying.
•
Never use the heaters in particularly dusty and explosive environments.
OUTDOOR CAMPUS | KORTRIJKSESTEENWEG 1266 | 9051 GENT | BELGIUM | info@outr.be
Installation
21
Advertenties
Inhoudsopgave
