Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
STICK MIXER
Warning: the blades of the blender shaft are extremely sharp.
• Take the motor part and the blender shaft. Attach the blender shaft to the motor part by turning
the blender shaft clockwise. To loosen it, turn the blender shaft the other way.
• Check whether the speed control is set on the lowest speed - to the right.
• Plug in the appliance.
• Lower the stick mixer into the food.
• Press the TURBO button for maximum speed or press the ON button to use the speed setting you
can set on top of the motor part.
• As soon as you release the button (on or turbo), the stick mixer will stop.
• When you have finished mixing or blending and released the button, wait until the knives have
stopped turning, before approaching the blender shaft with your hands.
The SPEED CONTROL is adjustable. By sliding the knob from right to left, the speed increases.
lowest speed = knob to the right
fastest speed = knob to the left
The TURBO button can also be used for instant power pulses without having to set the speed.
Attention: do not activate the stick mixer constantly, this can cause engine problems. Do not use the stick mixer
for more then one minute continuously, wait until the engine is cooled down in three minutes before operating
it again. Blend larger quantities in multiples sessions.
The stick mixer can't exceed a running time of 15 seconds without a load.
Always unplug the appliance from the supply if it is left unattended and before assembling, disassembling and
during cleaning.
You can use the stick mixer in the measuring cup and also in another bowl. When blending directly in a
saucepan while cooking, take the pan from the stove first to protect the appliance from overheating.
The anti-slip base is also an airtight lid for the measuring cup.
WHISK
Use the whisk for example for making whipped cream or beating egg whites.
• Take the motor part, the connector and the whisk.
• Attach the connector to the whisk.
• Attach the whisk to the motor part by turning the connector clockwise.
• Check whether the speed control is set on the lowest speed - to the right. You will
get the best result.
• Plug in the appliance.
• Place the ingredients in the measuring cup. Make sure the measuring cup is not
too full.
• Place the whisk in the measuring cup.
• Press the ON button to use the speed setting you have set on top of the motor
part.
• As soon as you release the button (on or turbo), the whisk will stop.
Always unplug the appliance from the supply if it is left unattended and before
assembling, disassembling and during cleaning.
To remove the whisk after use, turn it anti clockwise from the motor part and pull the whisk from the connector.
USE
EN - 13
Advertenties
Inhoudsopgave
