Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Basic settings
Open the door. Press
"This is a first time setup." is shown on the display. It is important that you choose the right settings
to ensure good dishwashing results.
Select setting with
or . Confirm selected setting with
Settings
1.
Language
2.
Rinse aid 0/1/2/3/4/5
Pre-selected at factory: 4
3.
Water hardness
0/1/2/3/4/5/6/7/8/9
Pre-selected at factory: 4
4.
TAB On/Off
Pre-selected at factory: Off
To change the selected setting, see the chapter Settings.
.
Select the language to be shown on the display.
Drying is faster and a better result is achieved if you use
rinse aid. You will also achieve a better dishwashing result
with clear and spotless dishes.
The rinse aid dispenser can be adjusted between 0 (Off) and
5 (High dosage).
Adjusting the water softener. Select a setting depending on
the hardness of the water supply. It is important that this
setting is correct!
For a water supply with a hardness below 6°dH (10°fH / 7°eH
/ 1.0 mmol/l), select 0. The water softener is deactivated and
no salt needs to be added.
Activate this setting when using an all-in-one detergent that
contains rinse aid.
This setting reduces the rinse aid dosage and affects how
often the dishwasher's built-in softener is regenerated.
.
9
Advertenties
Hoofdstukken
Inhoudsopgave
