Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
9.4 Holiday Mode
Device can be set into a Holiday Mode, i. e.:
•
If no water has been drawn off 4 days after the last
regeneration a new regeneration is started. After-
wards the device rests in holiday position.
•
As soon as water is drawn off again the device
stops the regeneration.
9.5 Guidelines for operation
Regular inspection of magnesium level - approx.
every 4 weeks
The system needs to be filled up if the magnesium le-
vel has dropped below the "Min"-mark. Use a complete
bag of VC51-A to fill up.
11. Working method during power failure
In case the power supply is interrupted for a longer period of time it is recommended to set the device to bypass
position for the time of power failure.
12. Maintenance
In accordance with the directive DIN 1988 the device must be maintained regularly, normally at least once a year.
Honeywell provides suitable Maintenance-Sets.
The maintenance must be carried out by expert personnel (fitter, service technician).
MU1H-1413GE23 R0807
GB
10. Maintenance
10.1 Settings
10.2 Time Setting
In order to set the time press arrow keys
10.3 Setting the water hardness
In order to set the water hardness press the
5 seconds, set hardness via arrow keys
and store entry by pressing the
10.4 Changing and/or omitting phases
A manual regeneration can be actuated at any time,
even if the remaining volume has not reached zero yet.
•
Briefly press the
10.5 Changing and/or omitting phases
In order to quickly jump to the next phase during the re-
generation press the
15
and
key for
and
key again.
key.
key.
www.honeywell.com
.
Advertenties
Inhoudsopgave
