All manuals and user guides at all-guides.com
5. USE INSTRUCTIONS
The wine cooler should be placed in where the ambient temperature is between 16-38°C (60-100°F).
If the ambient temperature is above or below this range, the performance of the unit may be affected.
For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to
fluctuate. The range of 5-20°C (41-68°F) may not be reached.
The above temperatures may fluctuate depending on whether or not the interior bulb is ON or OFF or
whether the bottles are located on the upper/middle or lower section.
TR2V121 control panel
RUN light: indicator light of compressor working. While the compressor operating, the red
light is on. While it stops operating, the red light is off.
UPPER CHAMBER: display of the actual temperature of the upper chamber.
LOWER CHAMBER: display of the actual temperature of the lower chamber.
℃/℉ light: when the ℃ light is on, it indicates Celsius temperature; When the ℉ light is on, it
indicates Fahrenheit temperature.
Button operation
SET button of the upper chamber: temperature setting button; Once you press the button,
the temperature increases 1℃ or 1℉. Setting range is between 5℃~12℃ (41℉~54℉).
SET button of the lower chamber: temperature setting button; Once you press the button,
the temperature increases 1℃ or 1℉. Setting range is between 12°C-20°C (54℉~68℉).
LIGHT button: cabinet light control button. Note: Once the light is turned on, it will
automatically off after 10 minutes all out of protecting the wines inside.
℃/℉ button: Celsius and Fahrenheit conversion button.
ON/OFF button: power on and off button; Press the button, it starts; press it again, it stops.
Note: The compressor will start to work about 5 minutes after it is power connected or
powered off. The temperature inside the cabinet will fluctuate and influence the refrigerating
effect if the surrounding temperature is too high or too cold.
33