Advertenties
Beschikbare talen
Beschikbare talen
EN
INSTRUCTIONS MANUAL
Refs. PT XXX ELX
TEMPORIZED TACTILE PUSHBUTTON
TECHNICAL SPECIFICATIONS
Power supply
Own Consumption
Charge
LED
Incandescent lamps
Halogen lamps 230V
Halogen +
electronic
transformer
Halogen +
ferromagnetic
transformer
Fluorescent
Compact
fluorescent
lamps (CFL)
Motors or fans
Amits contactor
Time
Working
temperature
Protection
DIMENSIONS
DESCRIPTION
● In installations with several pushbuttons, you can place
associated with an unlimited number of conventional pushbuttons and
5 lighted pushbuttons max.
● Resettableduring the cycle.
● Lockscrews to avoid its theft (PT EMP ELX and PT SUP ELX
models).
INSTALLATION
• Installation of electric equipment must be carried out
by qualified professionals.
• Before you start making any connections, disconnect
the power supply to avoid any risk.
Follow next steps for a correct installation:
1- Connection:
- Instal it according to the wiring diagram that appears in the
device
- It is only necessary to install the pushbutton which appears in
this diagram below when it is going to install additional
pushbuttons (with or without led).
With additional conventional pushbutton:
With additional switch for permanent tuning-on:
2- Time setting:
- Adjust the connection time turning the potentiometer behind
the back ot the device.
3- Mounting:
- PT EMP ELX and PT SUP ELX: mount the device using the
two lockscrews.
- PT GAR EL1: fix the mechanism, using the clamping claws,
without the frame. Once fixed, place the frame.
4- Operation:
- Approximating the finger toward the circular zone that
encircle the led the pushbutton is activated.
18x7W, 12x11W, 10x15W, 10x20W and
45
ATTENTION: Dangerous voltage!
L
230V~ 50Hz
N
L
230V~ 50Hz
N
230V~ 50Hz
16A cosφ=1
1.300W (130µF)
30sec ~ 12min
0ºC ~ +40ºC
IP20 according to UNE20324
80
80
0,7W
400W
3.000W
3.000W
3.000W
2.400W
10x23W
200VA
Yes
Advertenties
