Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3. INSTRUCTION FOR USE
PREPARING FOR OPERATION
1. Check the heater for possible shipping damage.
2. Connect the hose and regulator assembly to the PROPANE cylinder by rotating
the nut counterclockwise into the PROPANE cylinder's valve outlet and securely
tighten.
3. Open the cylinder's gas valve and check all gas connections with a soap and
water solution.
4. Connect power cord to well-grounded 220-240V~50Hz source of power.
3.1 IGNITION / Manual ignition
a. Turn the power switch to position I and check that the fan starts running correctly.
(Fig 2.)
b. Push the gas valve button and push repeatedly the piezoelectric lighter until the
flame lights up. (Fig 3-4)
Figure.3
c. As the flame lights up, keep the valve button pushed for 10 seconds approx.
Should the heater stop when the valve button has been released, wait one minute
and repeat the starting operation keeping the valve button pushed for a longer
time.
d. Contact your supplier should any problem continue.
Fig.4
Figure.2
Advertenties
Inhoudsopgave
