Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
A. Construction and characteristics
• Transportable terrace/garden heater with tank housing
• Casing in steel with powder-coating or stainless steel
• Heat emission from reflector
B. Specifications
• Use propane or butane gas only
• Max. wattage: 13000 watts
• Min. wattage: 5000 watts
• With CE certificates
C. Table of injector
C. Table of injector
GAS CATEGORY:
TYPES OF GAS:
GAS PRESSURE:
TOTAL HEAT
INPUT
(Hs): (Qn)
INJECTOR SIZE:
• The hose and regulator assembly must conform to local standard codes.
• Regulator outlet pressure should meet the corresponding gas category in the table of injector.
• The appliance requires approved hose in 1.2m length.
ASSEMBLY PARTS AND PROCEDURES
Tools needed:
• Open end wrench 10 & 13 mm
• Adjustable opening wrench (2) 20 cm long
• Slip joint pliers 23 cm long
• Philips screwdriver w/ medium blade
• Spray bottle of soap solution for leakage test
Parts supplied:
• Stand with LPG cylinder housing and 3 post brackets.
• 9 Cup Nuts (M6 mm),9 Small Screws (M6 x 8 mm) for Reflector Assembly.
• 6 Large Bolts and Flange Nuts (M6) for Support Legs/Main Pole Assembly.
• 3 Medium Bolts (M8 x 16 mm) for Support Legs/Stand Assembly.
• 3 Reflector Spacers and Wing Nuts, 6 Large Flat Washers for Reflector and burner Assembly.
• 2 Medium Bolts (M8x16 mm) for wheels and base.
• 6 Small bolts (M6x12) and M6 nuts for anchoring arm and base.
ASSEMBLY PROCEDURES
Attach wheel assembly to base
with 2pcs Medium bolts (M8x16mm)
I
3+(28-30/37)
Butane
Propane
28-30 mbar
37 mbar
13kW (870g/h)
1.90 mm for main burner
0.18 mm for pilot burner
Attach 1 anchoring arm to base with 2 small bolts
M6x12mm and 2pcs M6 nuts as shown
(repeat with the other 2anchoring arms so all 3 are
attached to base).
I
I
3B/P(30)
3B/P(37)
LPG
LPG Gas Mixtures
30 mbar
37mbar
1.90 mm for main burner
0.18 mm for pilot burner
- 17 -
I
3B/P(50)
Gas Mixtures
LPG Gas Mixtures
50mbar
1.68 mm for main burner
0.18 mm for pilot burner
Advertenties
Hoofdstukken
Inhoudsopgave
