Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2 | Deutsch
9 | English
2. Tool preparation
Read the following special tips carefully before using the riveting tool:
Danger
Before replacing the damaged parts, such as the nosepieces or clamping jaws, you
must first remove the battery from the tool.
Or it may cause personal injury!!!
Select a nosepiece that meets the rivet specification or other parts that need to be
replaced (see the following illustration).
• Make sure that the battery has been removed from the tool as shown.
2.1 Changing the mouthpiece
• According to figure ➀ , loosen the nosepiece with a wrench in the direction of the arrow
and unscrew the nosepiece.
• According to the illustration ➅ , screw the nosepiece that needs to be replaced with a
wrench in the direction of the arrow and tighten the nosepiece.
2.2 Changing the jaws
• According to figure ➁, loosen the screw cover with a wrench in the direction of the
arrow and unscrew the screw cover. According to figure ➂, loosen the clamping sleeve
with a spanner in the direction of the arrow and unscrew the clamping sleeve.
• Replace the three clamping jaws and other parts as shown in the following figure.
• According to figure ➃,➄, turn the clamping sleeve and screw cap in the direction of the
arrow and tighten them with a spanner, then simply charge the battery.
www.goebel-group.com
Advertenties
Hoofdstukken
Inhoudsopgave
