Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. Place the cabinet onto the base, flip both covers up and mount the cabinet onto the base
with the M6x12mm bolts.
7. Mount the pressure regulators to the legs with the M6x12mm bolts and M6 nuts.
8. Place the dust extractor against the
cabinet and mount it with the
M6x12mm bolts and M6 nuts, use
calking/kit to seal the gap between the
dust extractor and hole in the cabinet to
prevent dust from escaping during use.
9. Connect all air hoses as shown in the
picture on the right.
13
Advertenties
Inhoudsopgave
