Advertenties
Beschikbare talen
Beschikbare talen
Whirlpool TLCD - Manual
EN
4.1.2
Light or colour therapy
Option light fuction (white light / colour therapy).
Attention: Can only be turned on when when the water level is sufficient (bath full indication).
- Short touch, going to the light menu.
- Long touch, deactivate light functions.
- White light and colour therapy will only appear when these are present.
Option white light
- By touching the white light button the system will activate the white light.
- When you want to deactivate the function (early) you press the button again.
Option colour therapy
- By touching the colour therapy button the system will activate the colour therapy. Also a button that looks like an
open lock will appear on the screen.
- By touching the open lock the colour cycle stops and the system will automatically lock on the present colour. The
open lock icon will change to a closed lock.
- By touching the closed lock the system will automatically start the colour cycle again. The closed lock changes back
to the open lock icon.
- When you want to deactivate the funcion (early) you press the colour therapy button again.
Remarks
When activated the function will automatically stop after 20 minutes.
If a light function is on and the water level falls away (2 sec), the light functions turn off.
If a light function is on and the whirlpoolmotor is switched on, the lightning time will count the time cycle of the
whirlpool system + 5 minutes. This means that when the motor is switched off during the cycle, the light will then turn
off after 5 minutes.
Technical info: Both lights are designs with LED's. LED's have a long lifecycle. Because of this the costumer doesn't
have to replace the lights himself. If the LED's for some reason still don't work, they can only be replaced or repaired
by a qualified installer.
4.1.5. Option heating
White light active
Colour therapy active
-13-
Advertenties
