Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
This rotary switch is intended exclusively for use in the setting and commis-
sioning of Becker tubular drives. Please observe the Assembly and Operating
Instructions for the respective tubular drive. After commissioning, this rotary
switch set must be removed and replaced with a permanently installed oper-
ator control. The rotary switch/button in this set can be used as a surface or
flush mounted operator control. For this purpose, permanent installation is re-
quired.
General information
• Only use in dry rooms.
• Only use unmodified original parts from the control unit manufacturer.
• Keep children away from control units.
• Observe all pertinent country-specific regulations.
Caution
•
Risk of injury due to electric shock.
•
Connections to the 230 V mains must always be per-
formed by an authorised specialist.
•
Disconnect the connecting cable from the power supply
prior to assembly.
•
Always comply with the regulations of local energy supply
companies as well as the VDE 100 provisions for wet and
damp rooms during installation.
•
Never use faulty or damaged devices.
Intended use
Safety instructions
9 - en
Advertenties
Hoofdstukken
Inhoudsopgave
