Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Basic Operation
Turning on Main Power
Control section of main unit
Power/Standby
indicator
Main Power
Switching the AV INPUT [AV1/AV2] Mode
ON/OFF
ON/OFF
AV INPUT
AV INPUT
VOL
8
1
Press Main Power, located on the
front side of the main unit.
2
The Power/Standby indicator
instantaneously changes from red to
green and the main unit is turned on.
Notes:
■ When the Power/Standby indicator is red,
press ON/OFF on the remote control to turn
on the monitor.
The Power/Standby indicator changes from
red to green.
■ The input mode indication disappears after
five seconds.
1
Turn on the power of the connected
video equipment.
2
Press AV INPUT and select the
applicable input source. The screen
MUTE
displays AV1 or AV2 mode at the
upper right corner each time AV
MENU
INPUT is pressed.
SELECT
VOL
Note:
■ The AV input mode indication remains for
five seconds.
SELECT
• AV1: Select AV1 when video equipment is
connected to the AV 1 IN terminals.
The display of the AV1 mode indicates
LCD MONITOR
either AV1 or COMPONENT depend-
ing on the adjustment of the FEA-
TURE settings.
AV1 is displayed when AV1 is set to
NORMAL in the FEATURE settings,
and COMPONENT is displayed when
AV1 is set to COMPONENT.
(see page 14)
• AV2: The AV2 mode can be set to either IN
or OUT in the FEATURE settings.
(see page 14)
AV2 indication is not displayed when
the mode is selected to OUT.
▼ On-screen display
Initial mode (AV1)
AV1 mode
AV2 mode
AV1
PAL
AV1
AV2
Advertenties
Hoofdstukken
Inhoudsopgave
