Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION DETAILS
1. Find the anode and cathode of the strip light. Connect it to the power cord.
- The copper of the power cord should meet the anode and cathode of
the strip light.
- Plug the power cord directly into the strip light and cover the
connection, by closing the clip.
- Important: connect to a maximum of 100 m per power cord
2. Cover the exposed/open end of the strip light with the plastic cap.
- Important: when installing the strip light outdoors, use the glue found in the box to glue the power cord
connection and plastic cap to the strip light. Apply the glue all the way around the end of the strip and
allow to dry. This to ensure that the strip light is waterproof.
1.
SHORTENING THE STRIP LIGHT
The strip light can be shortened per meter. When shortening the strip light, make sure you cut at the cut marking. Use
a sharp pair of scissors to ensure that the strip light will not be damaged.
2.
EN
Advertenties
Inhoudsopgave
