Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION:
Connect the active speaker with a good quality speaker cable. (21). WARNING: only connected a
original slave speaker on the speaker output terminal!
If required connect an external signal source like a CD-layer to LINE IN.
Connect the device with an electric outlet (220-240VAC / 50Hz)
It is possible to connect an external antenna to the VHF-antenna socket for optimum radio reception.
LINE INPUT (DVD, CD-player etc.):
1. Connect the source (DVD-player, CD-player etc.) to the line input on the rear panel
2. Slide the SOURCE select switch to the correct position.
USB/SD:
1. Slide the SOURCE select switch to USB position.
2. Press PLAY button, MP3 begin to play.
MICROPHONE:
1. Inset the microphone to the MIC1 or MIC2 jack.
2. Adjust the MIC volume and tone control.
3. (Adjust the echo control).
Adjust the master VOLUME (8)
Adjust the master Equalizer (1+3) to get the right sound
WARNING:
Do not turn the volume at max when use this product at public place just like school, office etc. After long time
using the back panel will be hot, do not touch it by hand.
In the EU only for licencefree use in NL and PT and in DK for the hearing impaired, in the UK the frequency range
is not for use as well as in S, BE, FR and IT. Use in PL and ES with restrictions. For DE apply for an individual
license and contact Federal Network = BundesNetzAgentur. The enduser must apply for an assignment in other
EU countries due to several restrictions.
Advertenties
Inhoudsopgave
