Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
DO8132
•
Never allow children to play with the appliance.
•
Keep the appliance out of children's reach.
HOW TO USE
To adjust the speed, move the speed control to the required position :
0 : to stop
1 : slow
2 : medium
3 : fast
To make the fan head oscillate, push in the knob on the motor housing. To stop the fan
from oscillation, pull up on the knob.
To adjust vertical angle, tilt fan head up or down as desired.
ASSEMBLY
Mount the rear guard onto the front of the motor unit
by matching the 4 positioning holes (H) on rear guard
to the 4 positioning round pins on the front of the
motor unit.
•
Push in firmly until the pins protrude through the holes.
•
Secure the rear guard to the motor unit with the rear guard lock nut.
•
Insert the fan blade onto the motor shaft. Be sure that the pin in the shaft is match
with the slot on the fan blade. Press firmly until the fan blade stops. Secure the fan
blade with the fan blade screw.
•
Test the fan blade operation by rotating it with your hand. There should be
no friction with the rear guard lock nut. If the blade does not rotate freely,
disassemble and repeat the procedure.
•
Attach the front guard to the rear guard by positioning the hook.
•
Join the front/rear guards by pressing firmly.
•
Secure the two guards by the fixing screw.
CLEANING
Use a soft tissue or cloth to clean. In case dirt or grime does not come off easily, use
soapy water. Do not use benzine thinner or other solvents.
22
Advertenties
Inhoudsopgave
