Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SAFETY PROVISIONS
Pan detection mode
With the pan detection mode, the appliance does not work if you use an unsuitable pan or if the appliance does not
detect a pan on a cooking zone. The operation indicator shows U and it is not possible to increase the power level.
Residual heat indicator
After stopping the appliance, the cooking zones stay hot. If you touch a hot cooking zone this may result in injury.
The operation indicator shows H to indicate the cooking zone is hot. When the cooking zone is cool, the operation
indicator no longer shows H.
4
Extra information
REQUIREMENTS FOR PANS
Note:
Pans that were previously used on a different appliance (for example a gas appliance) are no longer
suitable for an induction appliance.
(Figure 3)
•
Use pans with a thick and flat bottom. The diameter of the pan must be the same as the diameter of the cooking
zone.
•
Use pans made from metal, enamelled metal, cast iron or stainless steel. These pans give the best result.
•
Obey the instructions from the manufacturer of the pan to see if the pan is suitable for an induction appliance.
•
Pans made from metal or aluminium pans with a copper bottom may stain the glass plate. Remove the possible
stains immediately after using the appliance.
•
Use a magnet to check if a pan is suitable for an induction appliance. The pan is suitable if the magnet sticks to
the bottom of the pan.
•
Make sure that you put the pan in the center of the cooking zone.
•
Some pans may produce sounds during use. The sounds are caused by the shape of the pan. This does not
affect the operation or safety of the appliance.
•
Never slide pans over the appliance, always lift the pans to avoid scratching the glass.
POWER LEVELS FOR COOKING
Note:
The values are indicative.
Power level Usage
0
Cooking zone is switched off.
1-2
Low simmer and slow heating.
3-5
Heating and quickly bringing to a simmer.
6-11
Medium cooking.
12-14
Cooking and roasting.
15/p
Searing, stir-frying and bringing to the boil.
5
Operation
The appliance has electronic sensors that activate when you touch the buttons on the control panel. The appliance
makes a sound when a control is touched.
32
•
English
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
