Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION PANEL USER INSTRUCTION
Remote Control Mode:
Put the plug into the power outlet, when you hear the buzzer comes outta "beep" sound, the whole fan
comes to standby.
1. On/Off Button: Press the power button
current environmental temperature at low speed. Press the button again to put the fan on standby
mode.
2. Speed Button: The fan starts at low speed. Press this button once to switch to medium speed, and
press again to switch to high speed. The speeds cycle in this order.
3. Swing Button: Press this button to activate the oscillation function (indicator light will turn on), causing
the fan to swing left and right for wider air flow. Press again to deactivate the oscillation and direct the
wind in a single direction.
4. Cooling Button: Press this button to activate the cooling mode (indicator light on screen will turn on)
for cooler air. Press again to turn off the cooling function to suit your needs. Notice: Do not use the fan
when the water tank is empty. Remember to refill it in time.
5. Timer: After the fan is running, press the timer button once to set it to run for 1 hour (1h indicator lights
up). Press again for 2 hours (2h indicator lights up). Repeat this process to set the timer for up to 12
hours. To turn off the timer function, press the button again.
6. Mode Button: Press this button to switch between natural wind mode (alternating strong and weak air
flows) and sleep mode. Press again to return to normal mode.
7. Lighting Function: The fan has lighting settings. If no other operations are performed after the fan
starts, it will automatically adjust the lighting after 5 minutes (all indicator lights dim). Press any button
to brighten the screen and activate all buttons. Notice: The lighting selection button on the remote
control can adjust the lighting. All other functions remain the same as operating from the control panel.
Manual Operation Mode:
Power: To operate the fan, press the On/Off button; the fan will start at low speed; press it again, the
•
fan will be off.
•
Speed: To adjust the speed, press the SPEED button, with each press the speed setting will be adjusted
as 3 speeds (Low, Medium, High)
•
Swing: To use the appliance with swing, press SWING button on the control panel to start. To stop
oscillation, press the SWING button again.
•
Timer: This dan is equipped with a 12 hours timer. Press the timer button repeatedly to select 1 hour, 2
hours, etc, to maximum timer setting of 12 hours. The number of setting hours will be showed on the
digital display. Once the timer has elapsed, the fan will be turn off and go into standby mode. If you
wish the fan to run continuously, ensure the timer is set to 0.
•
Cool: When the appliance is operating, press the COOL button to start cool wind function. Press this
button again to turn off the cool wind function. Note: When the water in the tank is low the cool wind
function will not work. You will need to add more water as detailed earlier in this manual.
OPERATION AND USE
1. Carefully open the package and ensure all components are present as per the provided list.
2. Before usage, assemble the machine's bottom section.
3. Place the assembled machine horizontally, avoiding any tilting during use. Verify that the plug outlet
matches the information on the machine's nameplate.
4. Avoid using the machine in extreme hot or cold environments. During hot seasons, change the water
in the box regularly to prevent odor and bacterial growth.
5. Water addition procedure:
•
Open the water box lid at the back of the machine and gradually add pure tap water.
•
Control the water level by monitoring the visible water level window.
•
Use only pure tap water to safeguard health, and ensure the machine is unplugged when adding water.
•
Avoid splashing water on the control panel and surrounding areas to prevent electrical leakage
accidents.
Add water only up to the max level to prevent overflow.Usage of ice crystals: The machine comes with
•
free ice crystal boxes which contain some ice crystal cubes inside.
a. Please check the ice crystal box before use. If the box contains only a few ice crystal cubes, you need
to add water to the max level and tighten the lid (as shown in picture). Please put the box in a normal
to turn on the fan. The fan will start working and display the
Advertenties
Inhoudsopgave
