Operating Instructions
Place the motor base on a flat, sturdy surface, it is so important that the surface is clean
and dry fit the jar on motor base, once assembled, plug the power cord into an electrical
outlet.
Add all necessary ingredients to jar and secure the cover; you may add more ingredients
by removing the measuring cup and dropping ingredients through the fill area, replace
the measuring cup after adding any ingredient.
Do not put hands in jar with the blender plugged in, start blending
All actions are ready, manual mode and pre-setting program mode are ready for your
choice. The unit will work once you definite any modes.
After power on, the knob should be at the "OFF" position when plug in, and the buzzer
beeps twice. When the machine does not work, it must turn back to OFF.
Preset Function
"OFF": After the blender is powered on.when the knob is in the OFF file,the buzzer will
beep 2 times and the blender will not work
"
" : Cleaning program: After power on,wait for the blender to start working in this
gear for 1.5s. In 2s, soft accelerate to 5 and run 2s and then pause 2s, This is a loop. repeat
10 cycles after the machine stops running.
"
" : Fruit and vegetable shortcut program: After power on, the blender works
in accordance with the set program at this gear, and stops running after a total of 2min.
"
" : Nuts Shortcut program: After power on, wait for 1.5s, the blender start to
working,The blender will work in accordance with the set program for 1min and then
stop.
"
" : Milkshake Shortcut program: After power on, wait for 1.5s, the blender start to
working, The blender will work in accordance with the set program for 1min and then
stop.
"
" : Ice crush program: After power on, wait for 1.5s ,the blender start to working,The
blender will work in accordance with the set program for 1min and then stop. It is normal
for machines to have a slight displacement when they are working.
" 1-5" : The blender accelerates gradually from gear 1 to 5
7