Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Manual start
After activation, the individual digits of the safety code
must be entered! First connect the mains. Completely
charge the robot before initial commissioning!
Activate
Reduce value
Enter the safety
code
Initial password: 0000.
Set and confirm individu-
al digits with arrows.
Push the start button
Robot starts mowing.
If the robot is switched off, it must be started at
the charging station.
Working time: 100 m
= 120 min. (mowing time
2
+ charging time).
If you want to change the code
Start by pressing the factory code 0000 + START.
The machine leaves the docking station and starts operating.
After a few meters • press STOP - error code E1 appears on the display.
• Press START and hold the START button for 10 seconds until the code U133 appears on the display.
• Press SET. The lock icon (image) ashes. Press the factory code 0000 one by one with OK,
until 0000 is lit continuously.
• Press SET again and the lock icon ashes.
Now • press the 4-digit security code that you have personally chosen and then press OK.
Your personal security code has now been set and is lit continuously.
Finally, press START and the machine will continue to run.
DON'T FORGET YOUR CODE!
Note: If you forget your personal code, the machine must be sent to the distributor to be reset.
Confirm input
Increase value
Back to the charging station
Actuate the emergency off
Robot stops
mowing.
Reduce value
Enter the safety
code
Initial password: 0000.
Set and confirm individu-
al digits with arrows.
Push the "Home button"
The robot returns and will start automatically at the
next interval.
User Manual
EN
Confirm input
Increase value
| 23 |
Advertenties
Hoofdstukken
Inhoudsopgave
