Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.
Press and hold SETUP until the LED indicator lights steadily.
Release the setup button.
3.
Use the number button to enter the number equivalent to the
chosen House Code (1=A, 2=B, .... 16=P).
4.
Press the ENTER button to confirm the House Code. The LED
turns off.
Note: The Housecode you choose must match the Housecode on
the Transceiver Module (TM12 or Marmitek Alarm Console) you are
using it with.
4. Technical data
Operating voltage:
Transmitter:
Ambient temperature: 0°C to +30°C
Dimensions:
Copyright Marmitek X-10 .
The right is reserved to make technical modifications.
3V, 2 x 1.5 V AAA ("micro") batteries
model 09048 RF 433MHz + infrared
model 09050 Infra-red
170 x 50 x 30 mm
7
Advertenties
Hoofdstukken
Inhoudsopgave
