Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operation
Q
Weighing
Q
Note: Starting with or without the weighing bowl
the product always starts at zero reading (the tem-
perature will also be shown) when you switch it on.
Note: Zero reading means 0 in g or 0:0.0 in lb:oz
or 0.00 in oz.
However, if you place the weighing bowl
product after you have switched it on, the product
will indicate the weight of the weighing bowl
Press the TARE button/Timer button
the numerical display
9
symbol
will appear.
13
Place the weighing bowl
Press the ON/OFF button
duct on.
Select the unit of weight by pressing the unit of
weight button (UNIT)/Timer button
each time it is pressed, the unit display
switch to the next unit listed: kg/g -> lb/oz -> oz.
Place the food you wish to weigh in the weigh-
ing bowl
.
1
The LCD readout
4
food in the selected unit of weight.
Important! Be sure never to add more than 5 kg
to the weighing bowl
1
can damage it.
Weigh and add
Q
The product allows you to weigh foods consecutively
without removing food already in the weighing
bowl
.
1
Place the weighing bowl
Press the ON/OFF button
duct on.
Select the unit of weight by pressing the unit of
weight button (UNIT)/Timer button
described in "Weighing" section.
Place the food you wish to weigh in the weigh-
ing bowl
.
1
10 GB/IE/NI
on the
1
1
to reset
5
to zero reading. The TARE
on the product.
1
to switch the pro-
3
. After
6
will
11
indicates the weight of the
. Overloading the product
on the product.
1
to switch the pro-
3
as
6
The LCD readout
food in the selected unit of weight.
Now press the TARE button/Timer button
The numerical display
ing. The TARE symbol
,
1
Now place more food in the weighing bowl
The LCD readout
the food you have added in the selected unit
of weight.
Continue in this way only until the maximum ca-
pacity of the product is reached or the weighing
.
bowl
is full.
1
Remove part of the
Q
weighed food
Place the weighing bowl
Press the ON/OFF button
duct on.
Select the unit of weight by pressing the unit of
weight button (UNIT)/Timer button
described in "Weighing" section.
Place the food you wish to weigh in the
weighing bowl
The LCD readout
food in the selected unit of weight.
Now press the TARE button/Timer button
The numerical display
The TARE symbol
Now remove the required amount of food from
the weighing bowl
The LCD readout
indicated by the minus symbol
Now press the TARE button/Timer button
The numerical display
The TARE symbol
Set the countdown timer/alarm
Q
The timer on the product has a time span of 00:10
to 99:50 minutes. The set time is counted down in
reverse to "00:00". An alarm signal then sounds
and the alarm display
Press the ON/OFF button
duct on.
indicates the weight of the
4
will show zero read-
9
will appear.
13
indicates the weight of
4
on the product.
1
to switch the pro-
3
6
.
1
indicates the weight of the
4
will show zero reading.
9
will appear.
13
.
1
will show a negative value
4
.
12
will show zero reading.
9
will disappear.
13
flashes.
14
to switch the pro-
3
.
5
.
1
as
.
5
.
5
Advertenties
Hoofdstukken
Inhoudsopgave
