Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating instructions
Time Switch, Mechanical
Item no. 2350441
Intended use
The product has a socket which can be switched on and off with the integrated mechanical time
switch. Thereby, an electric consumer load can be switched on or off automatically.
The product is designed for use indoors and outdoors. Please make sure that the location
of the product is also suitable when it is in operation, otherwise there is the danger of a life-
threatening electric shock (please observe the instructions under "Initial Operation"!).
The product must be connected to a mains socket with earth contact. For outdoor use, the
power outlet which is utilised must at least comply with protection class IP44.
See chapter "Technical Data" for information on connection and the maximum permissible
power consumption of the connected electrical loads.
For safety and approval reasons, you may not convert and/or alter the product. If you use
the product for purposes other than those described above, you may inflict damage on it.
Furthermore, improper use involves risks such as short-circuits, fire, electric shocks, etc.
Please read the operating instructions carefully and do not discard them. If you pass the
product on to a third party, please hand over these operating instructions as well.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Time Switch, Mechanical
• Sticker set (type plates)
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in these operating
instructions which absolutely have to be observed.
The arrow symbol is used when specific tips and information on the operation are
provided.
Observe the operating instructions!
Safety instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/material
damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General information
• The product is not a toy. Keep out of the reach of children and pets.
• Do not carelessly cast aside the packaging material. It may become a dangerous
plaything for children.
• Protect the product from exposure to extreme temperatures, direct sunlight, strong
vibrations and combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of time
or
- has been exposed to considerable strain during transport.
• Please handle the product with care. The product can be damaged if crushed,
struck or dropped, even from a low height.
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• If you have doubts about how the product should be operated or how to safely
connect it, consult a qualified technician.
• Maintenance, adjustment and repair work may be carried out only by an expert or
a specialised workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
b) Connection and operation
• The product's design complies with protection class I. Only an earthed mains
socket connected to the public power supply may be used as power supply to
the product.
• The mains socket into which the time switch is inserted must be easily accessible.
• The product is equipped with an enhanced protection against accidental contact.
An integrated mechanism will release the holes of the receptacle only, if the two
prongs of a power plug are inserted into the two holes at once.
Take special caution when children are around. Children cannot recognize the
danger arising from the incorrect use of electrical devices. There is a risk of a
life-threatening electric shock!
• The product is protected according to IP44; it can be used outdoors. It is essential,
however, to ensure the correct operating position (see chapter "Connection/Initial
Operation").
• Never block the cover over the socket or the transparent cover over the time
switch. Allow the covers to close automatically and completely by means of the
integrated springs when not in use.
• If devices, connection or extension cables are to be kept outdoors (lamps, water
pumps, etc.), they must be suitable for outdoor use.
• Never use the product in or under water, there is a danger of a fatal electric shock!
• Although the product is suitable for outdoor use, you must never aim the water jet
of a garden irrigation system or a pressure washer at the time switch.
• Never plug in, unplug or operate the product when your hands are damp or wet.
There is a risk of a life-threatening electric shock! The same applies for the load
that is plugged into the socket of the product, the plug must not be damp or wet.
• When it is raining/snowing do not open the covers (for the socket and the time
switch), do not connect or disconnect any device. There is a risk of fatal electric
shock!
• If any liquid has still managed to enter the device, immediately turn off the power
supply to the mains socket at which the time switch is connected (turn off the fuse/
circuit breaker/residual current operated circuit breaker of the associated circuits).
Only then can you unplug the daytime timer switch from the mains socket and
contact a specialist. Do not use the product any longer.
• Use the product only in a temperate climate, never in a tropical climate.
• Do not operate the device in environments where there are high levels of dust,
flammable gases, vapours or solvents. There is a danger of fire and explosion!
• Do not connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The
condensation that forms might destroy the device. Moreover, there is danger
of electric shock! Allow the product to reach room temperature. Wait until the
condensation has evaporated. This might take several hours. Only after this
should the product be plugged into the power supply and put into use.
• Never use the time switch in a vehicle.
• Never pull out the power plug from the front socket of the time switch by pulling on
its cable. Always pull the plug out of the front socket by gripping the area provided
for this purpose on its sides.
• Do not overload the time switch. Observe the connected load in the chapter
"Technical data".
• Always pull the switch timer out of the mains socket before cleaning it or when the
device will not be in use for a long time.
• Do not connect in series! This can lead to an overloading of the switch timer! There
is a risk of fire!
• Do not operate while covered! At higher connected loads, the switch timer
becomes warm, which can lead to overheating and potentially a fire if covered!
• Voltage-free only, if the plug is unplugged!
Advertenties
Inhoudsopgave
