Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Special Features
1. Gravity sensor
If you start your Gravity sensor and it detects a collision, the device will make a record which will be
saved and locked automatically, the segment cannot be overwritten, and this file cannot be deleted.
The options for the G sensor are: High/Medium/Low/Off. Factory default: Medium
2. Parking Mode
Turn on the Parking mode, the vehicle will now be stalled, the tachograph will now automatically turn of
the camera, as soon as the tachograph detects a vibration force generated, the tachograph will activate
the camera automatically for 10-15 seconds and then shut down again. When the vibration is detected
again, the camera will turn on again.
Recording video Parking mode 1080P 15 frames/sec, the file will automatically be locked.
Note: the Parking mode only works in case of automatic shutdown, if you do this manually, the
Parking mode does not work.
3. Motion detection
After pressing the OK key shortly, the camera will start the motion detection mode, the camera will
automatically record 10 seconds, after detecting a motion. If the camera detects no motions, it will
automatically turn off. When the camera detects a motion, it will turn on and the red recording light will
start to blink. Default: detection off
4. USB mode
Connect the USB cable to the computer, the tachograph will automatically pop up the menu, with the
following options:
(1). Memory
You can now access your video and photo files
(2). Camera
39
Advertenties
Inhoudsopgave
