Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Language
Do not disturb
Listening on other monitors
Monitor unlock
Connection ports
Monitor location
Reset to factory settings
Format flash memory
Format SD card
Copy to SD card
Automatic picture incoming
calls
Leave automatic message
(Absence Assistant)
Screensaver time
Software version
Select a system language.
No sound is played by the monitor during incoming
calls if do not disturb is enabled.
Enable/disable the option to listen on other monitors
(relevant only if more than one monitor is connected).
Once this function is enabled, you can release the gate
or door in Watch mode. In this case, no incoming call is
required to release the door/gate.
This function is unavailable for this system.
Assign a room to the monitor (available selection:
rooms 1, 2, 3, or 4). Caution: room 1 must be assigned
to the main monitor.
Reset to default settings.
Remove all files stored in internal memory.
Remove all files stored on the micro SD card.
Copy all files from the internal memory to the SD card.
Set how many pictures are taken during an incoming
call:
00: no automatic pictures
01: 1 automatic picture.
Enable if you want visitors to be able to leave a
message via the outdoor unit. This function works only
if an SD card is inserted. In order to use this function, a
welcome message and concluding message should be
recorded. If you decide not to, a standard message is
played.
Set the time for the monitor to switch to standby
mode if inactive (between 30 seconds and 1 hour)
System software version
- 18 -
Advertenties
Hoofdstukken
Inhoudsopgave
