Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
[Figure E]
4. The NXT Switch is fitted with a light sensor and can
be configured in the Lightpro app to switch on or off,
depending on whether light or darkness is detected. If
you want to use this function, take the position of the
sensor into account when placing the NXT Switch. Make
sure the sensor is exposed to ambient light. Prevent
stray light from other light sources (e.g. street lamps)
from reaching the sensor as this may interfere with the
sensor's correct operation.
F
[Figure F]
5. A reset button is located on the back of the NXT Switch
that can be used to reset the NXT Switch to its factory
settings. Use this button in the event of malfunction
or if you forgot your password (configured through the
app). Take the following steps to reset the NXT Switch
to its factory settings:
1. Make sure the NXT Switch is powered on, indicated by
the green indicator light on the
NXT Switch.
2. Press and hold the reset button for at least six seconds
9. After releasing the button, wait a few seconds
4. The green indicator light will flash twice before lighting
up permanently. The NXT Switch has now been reset to
its factory settings.
5. If your NXT Switch has already been connected through
the app: Delete the NXT Switch from your network. To
do so, go to the menu Extra -> Modify Product
6. (Re)connect the NXT Switch to your network. To do so,
open the app and go to the menu Extra -> Add product.
Or choose New network in the start screen of the app.
INSTALLATION
[Figure G]
1. Screw the antenna in the NXT Switch
Option 1: Wall mounting
[Figure H]
1. Fix the wall bracket to the wall with the screws
supplied.
[Figure I]
2. Place the NXT Switch in the wall bracket.
Option 2: Ground placement
[Figure J]
1. Push the spike into the ground up to the marking.
[Figure K]
2. Place the NXT Switch on the spike.
Advertenties
Inhoudsopgave
