Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
NXT Switch
User manual
Thank you for purchasing the Lightpro NXT Switch.
This document contains the required information for
correct, efficient and safe use of the product. Consult the
user manual of your transformer for more information
about the installation and connection of your lighting
plan or visit our website www.lightpro.nl
Read the information in this manual carefully before
using the product. Keep this manual near the product for
consultation in the future.
PRODUCT DESCRIPTION
The Lightpro NXT Switch is a smart switch intended for
use in combination with the Lightpro 12-Volt outdoor
lighting system. To control the NXT Switch, a suited
tablet or smartphone is required with the (free) Lightpro
app installed. For more information about using and
downloading the app, go to www.lightpro.nl/smart.
This product may only be used in combination with the
Lightpro 12-Volt system. Any modification may have an
impact on the safety, warranty, and correct operation of
the product and/or other parts of the system.
SPECIFICATIONS NXT SWITCH
Product
Article number
Usage (max.)
Maximum capacity (max.)
Dimensions (H x L x W)
Protection class
Ambient temperatures
Cable length
Input
CONTENT OF THE PACKAGING
[Figure A]
1. NXT Switch
2. Antenna
3. Ground spike
4. Wall mounting bracket
5. Screws
6. Plugs
7. Lightpro F-connector (art. no. 137A)
8. Lightpro M-connector (art. no. 138A)
9. Lightpro YF-connector (art. no. 173A)
Lightpro NXT Switch
195A
1W
150W
240 x 74 x 38 mm
IP44
-20°C to 50°C
5cm
12V AC/DC
Verify whether all parts are included in the packaging.
For questions about parts, service, complaints, or other
things, you can always contact us.
Email: info@lightpro.nl.
USE
When placing the NXT Switch, keep the following
regulations in mind:
[Figure B]
1. The NXT Switch must be connected to a permanently
powered 12-volt Lightpro system. Check whether the
green indicator light on the
NXT Switch is permanently lit.
Attention: for the correct operation of the NXT Switch,
your transformer must be permanently switched on.
You have to set the transformer to the "ON" position.
The automatic switching functions of your transformer
(the positions "AUTO", "2", "4" or "8") cannot be used in
combination with the NXT Switch.
[Figure C]
2. Only the lights you connect to the output of the NXT
Switch can be turned on/off by the Switch. Any other
lamps in the system will be permanently turned on.
[Figure D]
3. The NXT Switch cannot be used in line with the
Lightpro Motion Sensor (art. no. 165A) or the Lightpro
Receiver (art. no. 166A and 167A). If you want to
combine these accessories in one system, you have to
connect each accessory separately with the main cable.
E
Advertenties
Inhoudsopgave
