Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
B
Product usage
4.
When the Bluetooth device displays the speaker's Bluetooth name, EDENWOOD
MEGASOUND, select the name and confirm the connection. When pairing is successful,
a sound prompt will play, the speaker lights will turn blue, and BT will display constantly.
NOTE:
•
If the speaker's Bluetooth name does not appear on your Bluetooth device,
move the devices closer together. If that does not work, turn the devices off
and then on again before starting the pairing process again.
•
When pairing the devices, make sure they are not more than 10 metres apart
and there are no physical obstructions between the devices.
•
If you experience problems with connecting the devices, remove any existing
connections on your Bluetooth device and restart the pairing process.
•
Once you have paired a device, the units should remember the connection
and you will not need to pair them again.
Disconnecting a Bluetooth connection
•
In Bluetooth mode, press and hold the
on your device to disconnect. BT will flash and a sound prompt will play to confirm they
have been disconnected.
Connecting two speakers (TWS)
You can connect one MEGASOUND speaker to another MEGASOUND speaker via a Bluetooth
connection.
1.
Place the speakers near to each other. The speakers must be within 10 metres when
using the TWS function.
2.
Turn on both speakers and make sure they are in BT mode (BT will show on the screen).
3.
Press and hold the
then press and hold the
(SLAVE). The speakers will enter TWS mode. TWS PAIRING will display.
4.
When they are successfully connected, the master speaker will display HOST and the
secondary speaker will display SLAVE.
5.
Connect the external Bluetooth device through its Bluetooth settings to the speakers.
Choose the pairing name of the master speaker (HOST). When the Bluetooth is connected,
a sound prompt will play.
6.
Press and hold the
NOTE:
•
If you change the music source, the TWS function will be disconnected.
•
If you want to make a TWS connection with a different speaker, remove previous
connections before attempting to connect the new speaker.
button or turn off the Bluetooth connection
button on one speaker to make it the master speaker (HOST) and
button on the other speaker to make it the secondary speaker
button on either speaker to exit TWS mode.
23
EN
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
