Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
B
Using the appliance
Remove transport bolts
WARNING!
You must remove the transport bolts from the backside before using the product.
1
ΠLoosen the 4 transport bolts with a spanner.
Remove the bolts including the rubber parts and keep them for future use.
Ž Close the holes using the cover caps.
Levelling the washing machine
WARNING!
The lock nuts on all four feet must be screwed tightly against the housing.
ΠLoosen the lock nut.
Turn the foot until it reaches the floor.
Ž Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and
steady.
2
6
EN
B
Using the appliance
Connect the water supply hose
WARNING!
To prevent leakage or water damage, follow the instructions in this chapter
•
Do not kink, crush or modify water inlet hose.
3
Connect the water supply hose to the water inlet valve and a water tap with cold water
as indicated.
NOTE
Connect manually, do not use tools. Check if the connections are tight.
Drain Hose
WARNING!
•
Do not kink or protract the drain hose.
•
Position drain hose properly ,otherwise damage might result of water leakage.
There are two ways to place the end of drain hose:
Water
trough
ΠPut it into the water trough.
Connect it to the branch drain pipe of the trough.
1
7
EN
2
Advertenties
Hoofdstukken
Inhoudsopgave
