Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Thank you for purchasing this Velleman High-end mono mosfet power amplifier.
Please read the instructions carefully so that you can use the unit correctly.
CHECK WHETHER THE MAINS VOLTAGE IS CORRECT FOR THE UNIT.
THE POWER-CORD MUST BE REMOVED BEFORE OPENING THE UNIT .
THE STANDBY SWITCH IS IN THE SECONDARY POWER SUPPLY CIRCUIT.
THIS MEANS THAT THE UNIT IS NOT COMPLETELY ISOLATED FROM
About the power cord:
It is possible that in certain countries or regions, the mains plug is different to the one
supplied. In such a case a different plug can be fitted, but be careful to ensure that the
blue wire is connected to neutral, the brown to live, and the yellow/green to earth. Or ask
your dealer for a suitable power cord.
AC Power :
Please check the AC Power indication at the back of the unit.
For 100Vac to 120Vac, use the 115Vac setting.
For 220Vac to 240Vac, use the 230Vac setting.
IMPORTANT: Do not throw away the original packaging. Warranty will be void if the unit
is returned in another packaging than the original.
*Modifications and typographical errors reserved
CONTENTS
FEATURES ........................................................................................................................... 4
SPECIFICATIONS ....................................................................................................... 4
CONNECTION ...................................................................................................................... 5
OPERATION ................................................................................................................ 6
TROUBLESHOOTING ................................................................................................. 7
SET-UP EXAMPLE .................................................................................................... 24
WARNING NOTICES
IN ORDER TO AVOID ELECTRIC SHOCKS,
MAINS WHEN THE UNIT IS IN STANBY.
Warnings and Contents
3
Advertenties
Hoofdstukken
Inhoudsopgave
