CAUTION: Place the unit at least 3 metres from fans or air coolers. The wind
generated by these units may interfere with the mosquito trap operation.
Using the unit:
1.
Place the unit in a dry place with a flat surface.
2. Plug the supplied cable into the USB-C port of the mosquito trap.
3. Plug the other end of the cable into a USB-A port on an adapter or computer.
4. The light turns on and the fan starts blowing. The mosquitoes are lured by the
blue light and then sucked in by the fan. There they end up in the collection tray.
To turn the device off, unplug the USB cable from the adapter or laptop.
TIP: If the appliance is used in the bedroom, it is advisable to close windows and doors
3 hours before bedtime.
CLEANING AND MAINTENANCE
The cleaning frequency depends on how intensively the device is used. Check the
container at least once a week. Clean the receptacle more often if necessary.
1.
Remove the tray by turning it in the direction of the open lock.
2. Clean the collection tray.
3. Snap the collection tray back into the mosquito trap and turn in the direction of
the closed lock.
The unit itself may only be cleaned with a dry cloth. Never immerse the unit in any
liquid.
EN