Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
3) USING THE DEVICE
Charging the dock:
• Carefully plug the USB Type C connector into the USB charging port
of the device.
A
• Plug the USB connector of the charging cable into a USB port on your
computer or USB charger.
• The LED indicator
flashes when the device is charging.
B
• Once charging is completed, the LED indicator
lights up and the
B
device automatically stops charging.
• Unplug the charging cable from the device, which is now ready for
use.
• If the battery level is low, the LED
flashes, indicating that the
B
battery needs to be recharged.
Charging the earphones:
• Put the earphones into the charging dock. The magnetic charging
ports
will make contact automatically and the earphones will start
D
charging.
• When charging, the LED indicator
turns red, and once fully
F
charged, the LED indicator
switches off.
F
Power ON/OFF the device:
• Once you take the earphones out of the charging dock, they will
automatically power ON. If the charging dock is out of battery, the
earphones will not automatically turn on!
• When the earphones do not have a BT connection for 5 minutes,
they will automatically switch OFF.
• You can power the earphones back ON, by briefly putting them back
in the charging dock and taking them out again.
• You can also manually switch the earphones ON/OFF by:
• Power ON BOTH the earphones: touch and hold the power/touch
button
for ± 3 seconds.
G
• Once powered ON;
• You will hear a 'tone' & the LED indicator
will flash blue/red
F
alternately, the device is in pairing mode.
• In case the device already has been paired, it will connect
EN 05
Advertenties
Inhoudsopgave
