Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.4G Remote control*
1. Turn the knob
2. When DMX status is off, long pressing
mobile APP control (NOT in DMX mode).
POWER SUPPLY & TURNING ON/OFF
NOTE!
Never operate this device with rechargeable batteries or mains power supply
simultaneously to avoid any damages to the electronical parts. There is a risk of a short
circuit!
Only operate the light with the recommended rechargeable batteries.
Depending on the respective model, the LED light can be equipped with one or two
battery holders.
Power supply with DC power connection
1. Put the 2-pins plug of the power cable in the power socket .
2. Put the Euro plug of the power cable in the power outlet.
3. Move the power knob
4. Move the power knob
Power supply with rechargeable V-mount batteries* (accessory depends on model)
1. Slowly slide the fully loaded rechargeable V-mount battery into the holder from
above until it snaps into place.
2. Move the power knob
supply.
3. Move the power knob
APP CONTROL
This studio light can be controlled through a smart device (e.g. Tablet-PC, Smartphone)
by the 'LinkLite' App.
1. Use the link or QR code below to download the App 'LinkLite'.
2. Turn on the studio light and wait about 5 seconds.
3. Long press to reset the bluetooth connection for the studio light.
4. Enable Bluetooth on your smart device and connect with the desired studio light
model.
Once the studio light is connected, you are able to control the device through the App.
Note: If the connection failed, add the desired device manually through the App (select
'Add device').
APP DOWNLOAD:
https://a.smart321.com/comlinklite
*not included
to select the 001-099 channel in the mode of 2.4G remote control.
to postion 'II' to turn on the light by using DC power supply.
to postion '0' to turn off the light.
to postion 'I' to turn on the light by using battery power
to postion '0' to turn off the light.
to reset bluetooth connection while using
8
Advertenties
Inhoudsopgave
