Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. Press and hold the mode button until the corresponding indicator blinks fast.
à
The pairing mode is activated.
7. Connect the selected receiver to an available port on your device.
à
Mouse and receiver pair automatically.
à
The indicator goes off after pairing.
8. (If connection fails) slide the power switch OFF, then hold down the left and right mouse
keys and slide the power switch ON.
9 DPI settings
Press and hold (scroll wheel + right mouse button) for approximately 3 seconds to cycle
through DPI settings.
■
The Bluetooth or 2.4 GHz indicator will blink to indicate the new DPI setting.
■
DPI (number of blinks): 800 (1x), 1200 (2x), 1600 (3x), 2400 (4x), 4000 (5x).
10 Troubleshooting
Error
Cause
Mouse will not connect to the
No power to the mouse.
device.
Receiver and mouse are out
of range.
Connection error.
11 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
12 Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed of
as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-
back of waste. Conrad provides the following return options free of charge (more details on
our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points
set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply
in countries outside of Germany.
13 Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
product conforms to the 2014/53/EU directive.
■
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration
of conformity in the available languages.
14 Technical data
Input voltage / current .................... 5 V/DC, ≤400 mA
Rechargeable battery .................... 500 mAh 14500 Li-ion
Recharge time ............................... 1.5 hrs
Battery life (Bluetooth) ................... approx. 100 h
Battery life (2.4 GHz RF) ............... approx. 120 h
Transmission frequency
(Bluetooth) ..................................... 2.402 - 2.480 GHz
Transmission frequency (2.4 GHz
RF) ................................................. 2.405 - 2.479 GHz
4
Transmission power ...................... 0 dBm
Transmission distance ................... 10 m
2.4 GHz dongles ............................ 1x USB-C®, 1x USB-A
Sensor resolution ........................... 800 / 1200 / 1600 / 2400 / 4000 dpi
Supported OS ................................ Windows®, MacOS, Android™, iPadOS
Operating temperature ................. -5 to +40 °C
Operating humidity ....................... <85 % RH
Storage temperature ..................... -5 to +40 °C
Storage humidity ............................ <85 % RH
Dimensions (W x H x D) ................ 60 x 36 x 112 mm
Weight (approx.) ............................ 81 g
Solution
Make sure the power is
switched ON.
Charge the battery.
Move the mouse and re-
ceiver closer together.
Repeat the connection pro-
cess again.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2527476_V4_0424_jh_mh_en 45035997058018699-2 I6/O4 en
Advertenties
Inhoudsopgave
