Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
BT CONNEXION
When the tone arm is set to the home position or stops playing, the bluetooth function will automatically be
in pairing mode.
Then you need to press the mode key to switch between USB / SD and BT. There will be a dial tone and
the green LED will flash quickly when entering Bluetooth mode.
- - Place the loudspeaker and the Bluetooth device (telephone or musical device) within 9 meters of each other;
- - Activate the Bluetooth function on your Bluetooth device (phone or music device). Please consult the manufacturer's
instructions on how to enable Bluetooth on your device.
Once you have enabled Bluetooth on your device, select the pairing name "DIVARTE" from the list of available Bluetooth devices,
then press to connect.
After successful pairing, the green LED will stop flashing.
If necessary, enter the password "0000" to confirm the pairing.
USB/SD Mode
When the tone arm is set to the home position or stop playing, inserted the USB stick or SD card, it will
automatically switch to USB or SD card mode, press the next or previous button to select the songs you
want. Press the mode button to switch the mode between USB, SD and Bluetooth.
Aux input
It will be automatically switched to AUX mode when the AUX IN cable is inserted into this product, adjust
the volume knob to increase or decrease the output sound.
Maintenance :
Cartridge replacement
Note: Please exercise extreme care while performing this operation so as to avoid damaging the tone
arm and audio line wires. The Turntable's cartridge needs to be replaced every 3 - 4
months after continuous playing. Replacement Ceramic type Cartridges are widely available to
purchase from the internet.
Note: all other functions will not be used under the AUX IN model.
8
Advertenties
Inhoudsopgave
